Create Impact with Faux Concrete Walls

Faux concrete walls are an affordable and easy-to-install way to beautify your home. This technique involves using an overlay stenciled with concrete that transforms plain walls into beautiful brick designs.

Unlike topical sealers that sit on the surface and get worn off, GBS Penetrating Sealer actually helps protect the substrate by sealing molecular gaps. It is a great alternative for brick, concrete and stucco-like surfaces.


If you’re interested in the look of concrete walls but don’t have the time or money to pour them, consider installing fake wall panels. They’re light and come with the polyurethane layer, which allows them to be cleaned easily. Also, they don’t need the services of a specialist to install them, so you can reduce the cost of installation as well as transform your room yourself.

Also, you can achieve the appearance of concrete wall with paint or drywall compounds. These are cheaper than concrete resurfacer, but they might not be able to provide the same texture.

LOFT Raw is a quick and easy to put on concrete-look indoor wall finish that provides a modern metropolitan ambience. It’s a great alternative to cement wall paint, and it’s the next ideal alternative to genuine concrete in its raw form. The application process is as simple as humidifying with the help of a sponge. (Work in 20-30 square feet at a set moment). Following the application of LOFT Raw, use the trowel made of stainless steel to smooth and polish the softened surface, creating the “raw” finish.

Best Sealant for Faux Concrete

Enhancer Shield is the best sealer that can be used for faux concrete. It’s available in solvent formulations and water. The sealer works by moisturizing the concrete’s surface which allows it to resist water and salts that deice. It doesn’t alter appearance or cause harm. It is an excellent option for outdoor surfaces since it decreases the possibility of damage due to freeze-thaw spalling, mildew, as well as staining.

Decorative painting

It’s easy to apply thi cong son gia da. Just scrape away any paint that is peeling. Sand or etch concrete, if needed. Rinse thoroughly and allow to dry. Then apply two coats using an emery board, a nap roller, or pump sprayer taking at least 10 minutes between each coat. It should dry and smooth within 4 hours. This will be ready for walking or driving in about an entire day. It should be fully waterproof within 72 hours. It’s a very durable and inexpensive option for protecting the concrete surfaces you have.

Faux Concrete Wall Maintenance

The faux concrete panels provide your home with a more contemporary appearance. They are a great choice for people who desire the look of concrete but lack the time or funds to construct authentic concrete walls. The panels are also rated for fire protection and great weather protection.

They are more durable than actual concrete since they do not require pouring into molds. They are made with polyurethane, which is the most durable of materials that be resistant to scratches, impact and staining. They are easily cleaned with a clean cloth to keep them looking new.

The pillar section on the west wall is being rebuilt with cement. It will repair a lot of holes and eroded areas. The process should take only two days.

Protecting Faux Concrete Surfaces

Concrete is a strong sturdy, long-lasting and highly resilient material, which is used in a array of industrial needs. Concrete is not impervious to damage, and without proper protection and care concrete surfaces for industrial use are susceptible to damage from external factors.

Concrete surfaces need to be guarded against damage from water, whether they’re being used as counters, walls or floors. Fortunately, there are several tested and proven methods of making sure that concrete surfaces are protected. The optimal solution will rely on your specific conditions that you live in, therefore it is essential to seek out a concrete expert before selecting a product that will be effective in your space.

The decorative painting technique can create an impressive look to any simple concrete floor. Faux finisher Kim Longoa transforms an outdoor concrete patio into a comfortable couch area, with carpets using stencils that are adhesive and applied stains. Kim Longoa’s faux finisher also used stenciling to make a slate pathway that runs around pavers with red as well as a lily pond.